![]() The Voopoo PnP Vinci coil lasts on average 1 to 2 weeks. As a result, your coil will last longer and you will experience a nicer effect. We recommend that you always use the correct ratio of e-liquid and use the recommended settings. ![]() Another option is to install the coil and let it sit for 10 minutes so that it can fill with e-liquid. You can do this by putting a few drops of e-liquid in the coil before it is installed and letting it soak in for a while. The Voopoo PnP Vinci coils are suitable for the following products:īefore you can start using the coil, it will have to withdraw with e-liquid. Not every coil fits in every e-cigarette. Where do the Voopoo PnP Vinci coils fit into? We recommend at least 50% VG e-liquid for this coil. Thanks to the mesh coil, the Voopoo PnP Vinci Mesh coil delivers more flavor and vapor as regular coils. The recommended setting for this coil is between 32 and 40 watts. This is the strongest coil available for the Voopoo Vinci Pod Mod. The filament of this coil has a mesh structure for full flavor and a lot of vapor. ![]() With this coil you can inhale like a water pipe. Therefore, the 0.3 ohm coil is suitable for direct lung use. The 0.3 ohm PnP VM1 Vinci coil has a resistance of under 1 ohm. Thanks to the mesh coil, the PnP Vinci Mesh coil gives more flavor and vapor as regular coils. The recommended setting for this coil is between 25 and 35 watts. Therefore, the 0.45 ohm coil is suitable for direct lung use. The 0.45 ohm PnP M1 Vinci coil from Voopoo has a resistance of under 1 ohm. The recommended setting for this coil is between 28 and 35 watts. ![]() The 0.45 ohm PnP Vinci coil from Voopoo has a resistance of under 1 ohm. Thanks to the mesh filament, the Voopoo PnP VM4 0.6 ohm coil delivers more flavor and vapor as regular coils. The recommended setting for this coil is between 20 and 28 watts. With this coil you can inhale like a bong or like a cigarette. Therefore, the 0.6 ohm coil is suitable for both mouth to lung and direct lung use. The 0.6 ohm PnP VM4 Vinci coil from Voopoo has a resistance of under 1 ohm. Thanks to the mesh filament, the Voopoo PnP 0.6 ohm coil delivers more flavor and vapor as regular coils. The 0.6 ohm PnP Vinci coil from Voopoo has a resistance of under 1 ohm. We recommend up to 70% VG e-liquid for this coil. This regular coil is made of organic cotton, it works best between 12 and 18 watts. MTL is a way of inhaling that is comparable to the traditional cigarette. Therefore, the 0.8 ohm coil gives more vapor and flavor but is well suited for mouth to lung (MTL) use. The 0.8 ohm PnP Vinci coil has a resistance of under 1 ohm. We recommend a maximum of 50% VG e-liquid for this coil. This regular coil is made for pure flavor and works best between 10 and 15 watts. Therefore, the R2 coil is well suited for mouth to lung (MTL) use. The 1.0 ohm PnP R2 Vinci coil has a resistance of 1 ohm. This ceramic coil is made for pure flavor and works best between 10 and 15 watts. That is why the 1.2 ohm coil is very suitable for mouth to lung (MTL) use. The 1.2 ohm PnP Vinci coil has a resistance of above 1 ohm. As a result, each type of coil has its own effect. The Voopoo PnP Vinci coils are available in different resistances. Therefore, there is a suitable PnP Vinci coil for every damper. In addition, these coils are available for MTL and DL use. This makes these coils easy to install in the e-cigarette. The Voopoo PNP coils are replaceable from the bottom of the pod by pushing them in. These coils are of excellent quality and suitable for use in multiple Voopoo sets. The PnP coils are made by the manufacturer Voopoo.
0 Comments
Leave a Reply. |